Whether building a custom residential house for a buyer or one unit of an entire development, many different construction processes are involved – as is unfortunately the mess that accompanies such work. Services that specialize in construction cleaning in College Station Texas know very that the sawing, drilling, sanding, and fitting that is done leaves the inside of a finished structure covered from top to bottom with a layer of grime that can be hard to remove – and will reappear time after time if it is not removed the right way. This makes hiring a College Station construction cleaning service an effective way to make a new house move-in ready.
It is important to realize before undertaking such cleaning that it may well take more than one attempt at cleaning to remove all construction dust from interior surfaces. So the advice from construction cleaning experts in College Station TX is to slow down and be as thorough as possible – don’t rush through a job such as this one. The most productive methods can include the following tips:
- Keep Air Filters Clean – Debris such as drywall particles can become easily airborne if a dirty or clog if not changed frequently. If this happens, dust that is collected will just circulate out to land again on the same surfaces that were previously cleaned.
- Clean From The Top Down – Dust is going to rest on every horizontal and many vertical surfaces, so the least wasteful way to clean is to go from ceiling to floor. Particles fall downward and can be picked up as the cleaning continues downward. Doing it the other way just allows for surfaces already cleaned such as sills and stairs to get dusty from particles falling down.
- Primarily Vacuum – Sweep to get up larger dirt and debris only, as sweeping makes dust airborne and should be avoided if possible. Vacuum floors, window sills, and other surfaces once the ceilings and tops of walls have been cleaned. Vacuum inside wall and floor vents by removing the covers; then clean the covers as well before replacing them.
- Use Damp Towels – Lightly dampened towels pick up dust well when wrapped around a broom end and secured; they can be easily used to reach higher places. Change them frequently so the debris is not picked up in one place and put down somewhere else. Most importantly, using dampened towels should only be done on walls where paint has been drying at least a week to avoid ruining the paint.
- Clean With Dampened Sawdust – Sawdust or wood shavings that are clean and not from the job site that has been dampened and spread around on surfaces and floors works very well to attract dust. When it is vacuumed, it will pick up any material that has adhere to it via contact.
- Use Old Dryer Sheets – After being used in a clothes dryer, fabric softener sheets for dryers do a good job of picking up construction dust via static cling and are useful on smaller spaces such as window sills, baseboards, and moldings; it is a tip used by many professionals for a detailed clean look.
By following the above helpful hints, a finished home or office can be squeaky clean in a lot less time than might be thought. Remember to continually change air filters in the HVAC and any other vacuums being used . Then construction cleaning in College Station TX will be much less of a problem to face!